| Dio Br. | Proizvođač | Application |
|---|
| MAX3233EEPP | MaximIC | +-15kV ESD-protected, 1microA, 250kbps, 3.3V, dual RS-232 with internal capacitor. |
| MAX6318MHUK47CW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX517AEPA | MaximIC | 2-wire serial 8-bit single DAC with Rail-to-Rail outputs. TUE(LSB) 1. |
| MAX3266C/D | MaximIC | 1.25Gbps, 3V to 5.5V, low-noise transimpedance preamplifier for LANs. |
| MAX4536CSE | MaximIC | Quad, low-voltage, SPST analog switches with enable. 4 NO. |
| MAX3245ECWI | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX178BCWG | MaximIC | Calibrated 12-bit ADC with T/H and reference. |
| MAX758AEPA | MaximIC | Adjuistable, step-down, current-mode PWM regulator. Inputs from 4V to 16V, up to 750mA load currents. |
| MX7545BQ | MaximIC | CMOS 12-bit buffered multiplying DAC. Error +-1 LSB. |
| MAX875BESA | MaximIC | Low-power, low-drift precision voltage reference. 5V+-3.0mV output (Ta=25gradC). TEMPCO(max) 20ppm/gradC. |
| MAX6319LHUK48D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1120ms |
| MAX280EPA | MaximIC | 5th order, zero DC error, lowpass filter. |
| MAX195BEWE | MaximIC | 16-bit, 85ksps ADC with 10 microA shutdown |
| MAX8868C/D36 | MaximIC | Low-noise, low-dropout, 150mA linear regulator with auto-discharge function. Preset output voltage 3.60V |
| MXL1013IS8 | MaximIC | Dual precision op amp. |
| MAX6318LHUK43DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.300V min, reset timeout 1.12sec,typ watchdog timeout 6.3ms |
| MAX4066C/D | MaximIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX706TMJA | MaximIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 3.08V. Active-low reset output signal. |
| MAX5150AEEE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1/2. |
| MAX6314US31D3-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.08V. Reset timeout period(min) 140ms. |
| MAX870C/D | MaximIC | Switched-capacitor voltage inverter. Input voltage range +1.4V to +5.5V. 0.7mA quiescent current. 125kHz |
| MAX754CSE | MaximIC | CCFL backlight and LCD contrast controller. Positive LCD contrast. |
| MX7520UD | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.05% |
| MAX636BEPA | MaximIC | Preset -12V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX6318LHUK38AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 1ms,typ watchdog timeout 25.6sec |
| MAX393EUE | MaximIC | Precision, quad, SPST analog switch |
| MAX765C/D | MaximIC | -12V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX6319MHUK49D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 1120ms |
| MAX3750CEE | MaximIC | +3.3V, 2.125Gbps, fibre channel port bypass IC. |
| MAX6321HPUK35DX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
