| Dio Br. | Proizvođač | Application |
|---|
| MAX4632EPE | MaximIC | Fault-protected, high-voltage, dual analog switch (two NO/NC SPDT switches). Fault protection +-40V with power off, +-25V with +-15V supplies. |
| MAX3095CEE | MaximIC | +-15kV ESD-Protected, 10Mbps, 3V quad RS-422/RS-485 receiver. |
| MAX2682EUA-T | MaximIC | 400MHz to 2.5GHz, low-noise, SiGe downconverter mixer. |
| MAX9686C/D | MaximIC | Single very fast TTL output comparator |
| MAX923MJA | MaximIC | Dual micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. Internal programmable hysteresis. |
| MAX6306UK36D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.510(min),3.690(max) Nominal timeout period 140ms. |
| MAX1201EMH | MaximIC | +5V single-supply, 2.2Msps, 14-bit self-calibrating ADC |
| MAX633AEJA | MaximIC | CMOS fixed +15V output voltage, adjustable output with 2 resistors step-up switching regulator. 5% output accuracy. |
| MAX695CWE | MaximIC | Microprocessor supervisory circuit. |
| MAX4322ESA | MaximIC | Single, low-cost, low-power, Rail-to-Rail I/O op amp. BW 5MHz |
| MAX6316LUK39BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX4193C/D | MaximIC | CMOS micropower step-up switching regulator |
| MAX544ACPA | MaximIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1/2 |
| MAX405ESA | MaximIC | Precision video buffer amplifier. |
| MAX3669E/D | MaximIC | +3.3V, 622Mbps, SDH/SONET laser driver with current monitors and APC. |
| MAX364CPE | MaximIC | Precision, quad, SPST, normally closed (NC) analog switch. |
| MAX4514ESA | MaximIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally open (NO), +2V to +12V single-supply operation. |
| MAX4546CEE | MaximIC | Dual,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX724ECK | MaximIC | 5A step-down, PWM, switch-mode DC-DC regulator. |
| MAX4266ESA | MaximIC | Single, ultra-low-distortion, single-supply, 350MHz op apm with enable. Min gain 2V/V, single-supply operation +4.5V to +8.0V |
| ICM7240IPE | MaximIC | Programmable timer/counter |
| MAX232MJE | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX663CSA | MaximIC | Dual Mode 5V or programmable micropower voltage positive regulator. |
| MX7535SD | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX6313UK36D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.510(min) 3.690(max).Nominal timeout period 1120ms. |
| MAX6316MUK25DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| DG303ACK | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX318CSA | MaximIC | Precision, CMOS analog switch |
| MAX6318LHUK38BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 20ms,typ watchdog timeout 6.3ms |
| MAX475EPD | MaximIC | Quad, 10MHz single-supply op amp. |
